Titanium Carbide TiC sputtering targets CAS 12070-08-5

Titanium Carbide (TiC) sputtering targets 

Purity: 99.5%

Sputtering Targets : Diameter: 355.6mm (14") max. 

Single piece Size: Length: <254mm, Width: <127mm, Thickness: >1mm, 

if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree

Titanium carbide, TiC, is an extremely hard (Mohs 9–9.5) refractory ceramic material, similar to tungsten carbide. It has the appearance of black powder with the sodium chloride (face-centered cubic) crystal structure. As found in nature its crystals range in size from 0.1 to 0.3mm.

Titanium carbide is used in preparation of cermets, which are frequently used to machine steel materials at high cutting speed. It is also used as an abrasion-resistant surface coating on metal parts, such as tool bits and watch mechanisms.Titanium carbide is also used as a heat shield coating for atmospheric reentry of spacecraft

Application:

used for cutting tool material additives, and metal bismuth, zinc and cadmium molten crucible, preparation semiconductor wear-resisting film, HDD capacity memory device. Is an important part of the hard alloy, used as a metal ceramic, can also be used to make cutting tools, steelmaking industry used as deoxidizer.

Molar mass: 59.89 g/mol
Appearance: black powder
Density: 4.93 g/cm3
Melting point: 3,160 °C (5,720 °F; 3,430 K)
Boiling point: 4,820 °C (8,710 °F; 5,090 K)

We also supply below carbide sputtering targets material:
 
Chromium Carbide Cr2C3, CrC
 
Hafnium Carbide  HfC
 
Niobium Carbide  NbC
 
Silicide Carbide  SiC
 
Tantalum Carbide  TaC
 
Titanium Carbide  TiC
 
Tungsten Carbide  WC
 
Vanadium Carbide  VC
 
Zirconium Carbide  ZrC
 
Tantalum Hafnium Carbide   Ta4HfC5