Tin Telluride SnTe targets use in thermoelectric generator CAS 120404-02-7

Tin Telluride, SnTe sputtering targets

Purity: 99.99%

Shape: Discs, disks, step disk, delta, plate, sheets or made per drawing

Diameter: 355.6mm (14") max.

Single piece Size: Length:<500mm, Width: <250mm, thickness:="">1mm, if larger size than this, we can do it as Tiles joint by 45 degree or 90 degree

Made sputtering targets method: hot pressing (HP), hot/cold isostatic pressing (HIP, CIP), and vacuum melting, vacuum sintering

Molar mass:  246.31g/mol    Density: 6.445g/cm3           Melting point:  790°C

SnTe is a IV-VI narrow band gap semiconductor and has direct band gap of 0.18 eV. It is often alloyed with lead to make lead tin telluride, which is used as an infrared detector material.
Tin telluride normally forms p-type semiconductor (Extrinsic semiconductor) due to tin vacancies and is a low temperature superconductor.

Tin telluride is a thermoelectric material. Theoretical studies imply that the n-type performance may be particularly good.

Applications: 
Generally Pb is alloyed with SnTe in order to access interesting optical and electronic properties, In addition, as a result of Quantum confinement, the band gap of the SnTe increases beyond the bulk band gap, covering the mid-IR wavelength range. The alloyed material has been used in mid- IR photodetectors  and thermoelectric generator.

We also supply below Telluride sputtering target material:

Arsenic Telluride , As2Te3 target      

Antimony Telluride, SbTe, Sb2Te3 target       

Bismuth Telluride , Bi2Te3, BiTe target  

Bismuth Antimony Telluride , Bi-Sb-Te target

Cadmium Telluride, CdTe target       

Copper Telluride , CuTe, Cu2Te target      

Lead Telluride , PbTe target   

Tin Telluride, SnTe target

Molybdenum Telluride, MoTe2 target       

Niobium Telluride, NbTe2 target       

Silver Telluride, Ag2Te target      

Tantalum Telluride, TaTe2 target       

Tungsten Telluride , WTe2, sputtering target       

Zinc Telluride , ZnTe target